Are you ready to transform your space into a cosy and relaxing oasis?
Look no further than the Komorebi hammock chair!
With its unique design and ultimate comfort, this hanging chair is the perfect addition to any home or garden.
However, proper installation is key before you can fully enjoy all it has to offer.
Here are all the tips and tricks necessary for a flawless Komorebi hammock chair installation that will have you lounging in style in no time.
So, grab your tools and let's get started!
Frequently asked questions about Komorebi hammock chairs installation
Where should I install my Komorebi Hammock Chair?
Anywhere you have space – indoors and outdoors! We recommend installing the chair in an area with plenty of space for you to move around freely.
How much weight can the Komorebi hammock chair hold?
The Komorebi hammock chair is designed to hold up to 150 kg.
Can children use the Komorebi hammock chair?
Absolutely! It is a great way for all ages to relax.
Do you need assistance with the installation?
Not at all. These chairs are easy to install. But if you don't trust your DIY skills, you can hire a tradesman or simply order a stand.
How do I install the Komorebi hammock chair?
The installation process is simple and only requires a few household tools. Find everything you need to know in our blog, How To Install A Hanging Chair Indoors.
What do you need for a Komorebi hammock chair installation from the ceiling?
- A drill
- Hanging hardware for your Komorebi hammock chair
- Anchors (if needed - some ceilings can be too thin to support screws without them)
- A tape measure
- A level
- A ladder (to reach the installation point)
How high off the floor should a hammock chair be?
A hammock chair should be hung approximately 18 inches off the ground. This height provides optimal comfort and support for your back and spine.
If you are hanging your hammock chair from a beam or other horizontal surface, measure the distance from the floor to the surface before hanging your chair.
Tips for safely installing a hanging hammock chair
- Make sure that the location you choose to install the chair is sturdy and can support the chair's and the user's weight.
- Use proper hardware and follow the instructions that come with your Komorebi hammock chair to ensure a secure installation.
- Inspect the area around the installation site for potential hazards, such as sharp objects or loose branches that could cause injury.
- Always use caution when getting in and out of the hammock chair, and ensure small children are always supervised while using the chair.
- Ensure the suspension straps are properly adjusted and securely attached to the mounting point.
- Check all hardware before use, and periodically inspect the hammock chair for signs of wear or damage.
Tips for installing an outdoor hammock chair
- Hang your hammock chair from a strong and sturdy tree branch that can support your weight. Make sure the branch is at least 8 inches in diameter.
- You can also use a hammock stand if you don't have a tree in your backyard.
- Once you've found the perfect spot to hang your hammock chair, mark the location of the two hooks or eyes on either side of the chair.
- Drill pilot holes at the marked locations. Then, screw the hooks or eyes into the pilot holes.
- Now it's time to hang your hammock chair! First, insert one end of the rope through the other end's loop. Then, tie a knot to secure it in place.
- Next, thread the rope through the hooks or eyes on either side of the chair, and pull it until the hammock seat is at your desired height.
- Finally, sit back and enjoy your new Komorebi hammock chair!
